OSBiz Hardware upgrade from HiPath 3800 V9
Unify OpenScape Business Upgrade from HiPath 3800 V9 to OSBiz X8
The license upgrade item must be ordered separately, as must any additional licenses required for OSBIZ.
Before migrating a HiPath 3000 V5 / V6 / V7 / V8 / V9 system to OpenScape Business V2, the compatibility of all existing hardware units with the new system requirements must be verified.- The system boxes can continue to be used.
- The HiPath 3000 mainboard and HG1500 must be removed and replaced with the mainboard of the appropriate OSBIZ system.
- OpenScape Business X3/X5 systems require a UPSC-D power supply unit (X3W/X5W) or a UPSC-DR power supply unit (X3R/X5R). The power supply units of the original HiPath 3000 system must be replaced by these as necessary.
- Peripheral line cards must be checked for compatibility with OpenScape Business against the line card list. Incompatible cards must be replaced or discarded, as necessary.
- Optiset E phones will not work in OpenScape Business.
DSP channels for systems with mixed TDM and IP voice connections (e.g. PSTN to SIP subscriber and vice-versa):
DSP channels for up to 8 simultaneous connections are integrated in the mainboard. The OCCB1 plug-in module can be used to extend the number of DSP channels available, allowing up to 48 simultaneous connections. The OCCB3 card provides further digital signal processing channels and is required for increasing the maximum number of simultaneous voice connections from 49 to 128.
When a HiPath 3000 system is upgraded to OpenScape Business, the MAC address of the original HiPath 3000 motherboard is placed on a blacklist to prevent it from being re-used for HiPath 3000 licenses.
consisting of:
1 S30810-K2962-X UC Mainboard X8
1 P30152-P1603-P1 OSBiz System Software small (without OCAB
Unify OpenScape Business Upgrade van HiPath 3800 V9 naar OSBiz X8
De licentie-upgrade moet apart worden besteld, net als alle extra licenties die nodig zijn voor OSBIZ.
Voor de migratie van een HiPath 3000 V5 / V6 / V7 / V8 / V9 systeem naar OpenScape Business V2, moet de compatibiliteit van alle bestaande hardware-eenheden met de nieuwe systeemvereisten worden geverifieerd.- De systeemkasten kunnen verder gebruikt worden.
- Het HiPath 3000 moederbord en HG1500 moeten worden verwijderd en vervangen door het moederbord van het juiste OSBIZ systeem.
- OpenScape Business X3/X5-systemen vereisen een UPSC-D-voedingseenheid (X3W/X5W) of een UPSC-DR-voedingseenheid (X3R/X5R). De voedingsunits van het oorspronkelijke HiPath 3000-systeem moeten indien nodig worden vervangen door deze.
- Perifere lijnkaarten moeten gecontroleerd worden op compatibiliteit met OpenScape Business aan de hand van de lijnkaartenlijst. Incompatibele kaarten moeten worden vervangen of weggegooid, indien nodig.
- Optiset E telefoons werken niet in OpenScape Business.
DSP-kanalen voor systemen met gemengde TDM- en IP-spraakverbindingen (bijv. PSTN naar SIP-abonnee en omgekeerd):
DSP-kanalen voor maximaal 8 gelijktijdige verbindingen zijn geïntegreerd in het moederbord. De OCCB1 insteekmodule kan worden gebruikt om het aantal beschikbare DSP-kanalen uit te breiden, waardoor maximaal 48 gelijktijdige verbindingen mogelijk zijn. De OCCB3-kaart biedt nog meer digitale signaalverwerkingskanalen en is vereist om het maximale aantal gelijktijdige spraakverbindingen te verhogen van 49 naar 128.
Als een HiPath 3000-systeem wordt geüpgraded naar OpenScape Business, wordt het MAC-adres van het oorspronkelijke HiPath 3000-moederbord op een zwarte lijst geplaatst om te voorkomen dat het opnieuw wordt gebruikt voor HiPath 3000-licenties.
Bestaande uit:
1 S30810-K2962-X UC moederbord X8
1 P30152-P1603-P1 OSBiz Systeemsoftware klein (zonder OCAB)